Premier Plastics Inc.  

Home
Download Brochures
TANKS - CANADA
TANKS - USA
SUPERTANK
What's New!
Leg Tanks (Water Hauling)
Water Level Gauge
Certifications
Above Ground Tanks
Vertical 
Box 
Tapered 
Cone- Bottom
Utility
Leg Tanks (Water Hauling)
Below Ground Cisterns
Supertanks
Saturna
Fat Albert 
Pipe Sizing (PDF)
Septic Tanks
Supertank 
Saturna
Pumpout
Installation Instructions (PDF)
Accessories
Risers
Distr. Boxes
Access Lids
Fittings
Filters
Warranty
Details
FAQ
Frequently Asked Questions
Quick Reference
Canadian
U.S.
Other Products
Traffic Barriers
Bicycle Lockers
 
Septic
Pump out Chambers

Septic Pump Out Chambers

'Submarine' plumbed as 'cabin' septic tank and with optional riser (EXT)
 250 Imp Gal., 300 US Gal.
 

Seamless Construction

Will not crack, rust or corrode

Will not leak or allow infiltration or exfiltration

Easy access

 

Pump Out tank
'Moonlander' Pump-out Tank with optional riser (EXT)
190 Imp. Gal., 230 US Gal.

Fat Albert tank
'Fat Albert' with & without riser (EXT)
500 Imp. Gal., 600 U.S. Gal.

The winner of the year's most "creative tank use" competition was Bob Ellison at Isles West Water Services and Volunteer - Saltspring Island Defense Corp.  

Creative uses

 

Fat Albert

Fat Albert

Volume in tank  

DEPTH (inches)  IMP. GAL.  U.S. GAL. 
60  500  600 
INVERT A  480  575 
54  470  565 
INVERT B  460  552 
48  430  516 
42  380  456 
36  320  384 
30  255  306 
24  187  225 
INVERT C  132  160 
18  125  150 
12  70  84 
6  22  26 

Selection Guide (Compliance with local Health Authority must be checked prior to installation). Installation subject to local health regulations.

APPLICATION   MODEL NO.   FITTINGS/NOTES/INSTRUCTIONS 
Pumpout / Dosing Tank P O 190 4" PVC spigot on inlet.
Pumpout / Dosing Tank P O 250 4" PVC spigot on inlet.
Pumpout / Dosing Tank P O 500 4" PVC spigot on inlet.
Trash Tank TR 500 4" PVC Tee-Y on inlet and outlet. Install riser for cleaning access.
Siphon Dosing Tank* SI 500 4" PVC spigot on inlet and outlet. "O" ring and gear clamp on outlet. Set siphon in concrete base.
Dry Well DW 500 4" PVC spigot on inlet. Drill 1 1/2" holes 12" apart around lower half. Install as approved by local Health Authorities.
* Tank accommodates "Fluid Dynamics Siphons Inc. Models 207, 313, 413, 417, 423 and 430. Contact your septic tank supplier.
 

Good Solid Tanks!
Premier Plastics - 8328 River Way, Delta, B.C., Canada, V4G 1C4
Phone: (604) 952-6686, 1-800-661-4473 (Canada & USA) Fax: (604) 952-6696 
E-Mail: tanks@PremierPlastics.com